Fibreseeker 3
Continuous Carbon Fiber 3d Printer
- Technology
- FFF + continuous fiber co-extrusion (CFC)
- Printing modes
- 3 — High Speed (FFF) · High Strength (CFC+FFF) · Hyper Strength (CFC)
- Tensile strength
- Up to 900 MPa (Hyper Strength Mode)
- Max print speed
- 500 mm/s (FFF nozzle)
- Build volume
- 300 × 300 × 245 mm (11.81 × 11.81 × 9.65 in)
- Nozzle system
- Dual extruder — one FFF, one CFC
- Printing materials
- PLA, PETG, PA, PACF, PC, ABS + continuous carbon / glass fiber
- Touchscreen
- 5-inch full-color
Available to order
$4,999.00
The FibreSeeker 3 is built around Composite Fiber Co-extrusion (CFC): continuous carbon or glass fiber strands are embedded in a thermoplastic matrix during printing so fiber orientation follows the load path — not random short fibers inside a spool. The result is structural composite parts at a desktop footprint and a fraction of the cost of CNC machining or traditional composite layup.
Three printing modes
Switch modes per print depending on whether you need speed, strength, or peak structural performance.
- High Speed Mode — FFF nozzle only. Standard thermoplastic printing at up to 500 mm/s. Ideal for rapid prototyping and non-structural parts.
- High Strength Mode — CFC + FFF dual-nozzle simultaneously. Adds a continuous-fiber “skeleton” to plastic prints. Adjustable fiber ratio balances strength, weight, and cost.
- Hyper Strength Mode — CFC nozzle only. Full continuous-fiber co-extrusion for tensile strength up to 900 MPa — more than 2× the tensile strength of 6061 aluminum, at a fraction of the weight.
Mechanical performance
- Tensile strength up to 900 MPa (Hyper Strength Mode, material and geometry dependent).
- Over 2× stronger than 6061 aluminum by tensile strength.
- Higher stiffness and rigidity than standard FDM or chopped-fiber filaments.
- Better fatigue behavior for functional brackets, frames, and tooling.
- Fiber orientation follows your load paths — not random short fibers inside a spool.
Speed & accuracy
- Up to 500 mm/s print speed (FFF nozzle) — 10× faster than typical industry benchmarks.
- ±0.05 mm dimensional accuracy maintained at full speed via real-time motion correction.
- Lattice infill makes parts stronger where load demands it and lighter where it does not.
Smart hardware & workflow
- Custom slicer — analyzes load distribution and fiber path, generates optimized toolpaths, supports STL / STEP / OBJ, open G-code export.
- Built-in HD camera — real-time print monitoring and failure detection.
- 5-inch color touchscreen — track temperature, speed, and progress; save profiles; one-tap firmware updates.
- Auto-levelling & smart calibration — printer self-prepares in seconds for consistent first-layer adhesion.
- Filament runout detection — automatically pauses so you can reload and resume without losing the print.
Social proof
FibreSeeker 3 raised $4.7 million from 1,539 backers on Kickstarter and was awarded “Project We Love” by the Kickstarter team. It is now available to order in the USA through Fibricate, your authorized US reseller.
Specifications are summarized for buyers on fibricate.com. Always verify the latest datasheet for your material system before committing production parameters.