About this material
Entry-level PLA for the FibreSeeker 3's plastic nozzle. Easy, low odor, little warp. Fine on its own for prototypes and light-duty parts. If you add X-CCF or X-CGF, this can be the plastic in that print; the CFC PLA 4-pack is another matrix option, not a requirement.
Filaments
PLA Filament (4 Pack)
Easy FFF PLA for the FibreSeeker 3
PLA 4-pack for the FibreSeeker 3 FFF nozzle. Easy to print, low warp — use it for everyday parts, or as the plastic side of a composite print with continuous carbon or glass fiber.
- Process
- FFF on the FibreSeeker 3
- Compatible printer
- FibreSeeker 3
- Diameter
- 1.75 mm
- Nozzle
- 210–230 °C
- Bed
- 45–60 °C
- Drying
- About 50 °C before printing
- Density
- 1.24 g/cm³
- HDT
- 50–60 °C (0.45 MPa)
- Use with
- FFF nozzle; optional continuous carbon or glass fiber
Available to order
$84.99
Technical data — PLA-Basic (FFF)
PLA-Basic is an entry-level FFF filament for the FibreSeeker 3 plastic nozzle: easy printing, low odor, little warp. Values below are a safe subset from the manufacturer plastic TDS.
Typical properties
PLA-Basic typical properties (manufacturer TDS)
| Property | Method | Typical value |
|---|---|---|
| Tensile strength (X-Y) | GB/T 1040 | 63.95 MPa |
| Tensile strength (Z) | GB/T 1040 | 28.29 MPa |
| Bending strength (X-Y) | GB/T 9341 | 101.2 MPa |
| Density | GB/T 1033 | 1.24 g/cm³ |
| Heat deflection (HDT) | GB/T 1634, 0.45 MPa | 50–60 °C |
Recommended print settings
- Nozzle temperature
- 210–230 °C
- Bed temperature
- 45–60 °C
- Drying
- About 50–55 °C, 4–6 h
- Typical manufacturer TDS values — not Fibricate lab results.
- FFF and CFC print settings are not interchangeable.
FAQ
- What is this PLA for?
- This is FFF PLA for the FibreSeeker 3 plastic nozzle. Use it for everyday parts, or as the plastic side of a print that also uses continuous carbon or glass fiber.
- Do I need CFC PLA with this pack?
- No. Regular PLA works on the FFF nozzle. The CFC PLA 4-pack is another matrix option for composite printing, not a requirement.
Shop all filaments · CFC PLA 4-pack · Continuous carbon fiber (X-CCF) · Glass fiber (X-CGF) · FibreSeeker 3 printer